KB Home Center
Oatey 32166
Oatey® orange Lava CPVC cut-in cement is a single-step, fast curing cement is recommended for pressure, potable water cut-in, repair applications. Designed for cut-in applications where downtime is limited, it sets the fastest, eliminating the need for bracing. Because it quickly melts pipe surface to weld the joint, primer is not required. It also applies easily with included in lid dauber. This orange, low VOC, medium bodied, fast setting cement can be used to solvent weld CPVC pipe and fittings up to 6 in diameter with interference fit. Oatey® products have earned the trust of plumbing professionals for over 100 years.
California residents see Prop 65 WARNINGS
| Applicable Materials | : | CPVC |
| Application Method | : | Brush, Roller |
| Boiling Point | : | 151 deg F |
| Color | : | Orange |
| Compositions | : | Furan, Tetrahydro, Ethane, Chloro, HomoPolymer, Chlorinated, Acetone, Silica, Amorphous, Fumed |
| Container Type | : | Can |
| Curing Time | : | 4 to 5 min |
| Density | : | 8.05 lb/gal |
| Drying Time | : | 15 min |
| Flammability Rating | : | 3 |
| Flash Point | : | 14 to 23 deg F |
| Form | : | Liquid |
| Net Content | : | 8 oz |
| Odor/Scent | : | Solvent |
| Specific Gravity | : | 0.97 |
| Temperature Rating | : | 40 to 110 deg F |
| VOC Content | : | <400 g/L |
| Viscosity | : | 500 to 1500 cPs |
- One-step orange cement with dauber primes and solvent welds CPVC
- Fast set for pressure, potable water cut-in, repair applications
- Quickly melts pipe surface to weld the joint, primer not required
- Can be used on CPVC pipe and fittings up to 6 in Dia with interference fit
- For commercial hot and cold water systems up to 200 deg F/93 deg C and including FlowGuard Gold® and Corzan® CPVC piping systems
- Designed for cut-in applications where available downtime is limited
- All Oatey® solvent cement and primer products are certified to UL Greenguard gold
Catalog